RGB via SCART

[SailorSat]

• Introduction
  If you wish to connect a RGB-SCART unit, let it be a TV, Beamer or for example an old Amiga monitor, you can build a simple cable.
  
  
  
• Where to get a cable
  If you don't want to build a cable yourself, or you don't have any soldering skills, you can buy prebuilt cables at www.wolfsoft.de.
  
  Please note! There are many SCART-to-VGA cables available on the net, which have a different Pinout.
  
  
  
• Pinout
  The most simple pinout would be this one.
  
  

  VGA             SCART   NAME
   1  -----------  15     Red Signal
   6  -----------  13     Red Ground
  
   2  -----------  11     Green Signal
   7  -----------   9     Green Ground
  
   3  -----------   7     Blue Signal
   8  -----------   5     Blue Ground
  
   9  --100-Ohm--  16     Blanking = RGB-Select (+5V -> 3V)
   5  -----------  18     Blanking Ground
  
  **  -----------   8     AV-Select -- +5V = 16/9, +12V = 4/3
  
  13  --1000-Ohm-  20     Sync Signal (H-Sync*)
  14  --1000-Ohm-  20     Sync Signal (V-Sync*)
  10  -----------  17     Sync Ground
  
  * neg. H-Sync + neg. V-Sync = neg C-Sync

  
  
  
• Pictures