- Introduction
If you wish to connect a RGB-SCART unit, let it be a TV, Beamer or for example an old Amiga monitor, you can build a simple cable.
- Where to get a cable
If you don't want to build a cable yourself, or you don't have any soldering skills, you can buy prebuilt cables at www.wolfsoft.de.
Please note! There are many SCART-to-VGA cables available on the net, which have a different Pinout.
- Pinout
The most simple pinout would be this one.
Code:VGA SCART NAME 1 ----------- 15 Red Signal 6 ----------- 13 Red Ground 2 ----------- 11 Green Signal 7 ----------- 9 Green Ground 3 ----------- 7 Blue Signal 8 ----------- 5 Blue Ground 9 --100-Ohm-- 16 Blanking = RGB-Select (+5V -> 3V) 5 ----------- 18 Blanking Ground ** ----------- 8 AV-Select -- +5V = 16/9, +12V = 4/3 13 --1000-Ohm- 20 Sync Signal (H-Sync*) 14 --1000-Ohm- 20 Sync Signal (V-Sync*) 10 ----------- 17 Sync Ground * neg. H-Sync + neg. V-Sync = neg C-Sync- Pictures