Seite 6 von 8 ErsteErste ... 45678 LetzteLetzte
Ergebnis 76 bis 90 von 106

Thema: Getestete Grafikkarten

  1. #76
    Registered User Avatar von haynor666
    Registriert seit
    15.01.2010
    Beiträge
    29


    Card: Palit Radeon 9550
    Driver: Catalyst 7.1 (9550 was introduced in 6.8 so you cannot use 6.5 for this card)
    Result: Works (no fake resolutions like 321x240, 401x240 etc. - catalyst higher than 6.5) 25khz not tested
    Geändert von haynor666 (25-01-2014 um 17:41 Uhr)

  2. #77
    Registered User
    Registriert seit
    13.07.2011
    Beiträge
    2

    Thumbs up ATI Radeon 9600 Working

    See attached picture.

    Card: ATI Radeon 9600 (Powercolor)
    Driver: Catalyst 6.5
    Result: Works / Funktioniert

    I don't remember which resolutions needed tweaking though. I think I used 321x2xx instead of 320x2xx. No big deal though.

    Yours,
    --Jay
    Angehängte Grafiken Angehängte Grafiken

  3. #78
    Registered User
    Registriert seit
    26.12.2011
    Beiträge
    1
    Card: NVidia GeForce 9600GSO PCI-E 768MB DDR2 (EVGA)
    Driver: ForceWare 182.06
    Result: Works with Dongle / Funktioniert mit Dongle

    Newest drivers don't work, tested with dongle and without dongle. Forceware 182.06 works with dongle.
    Forgot to take a picture of the vga, attached image is the same vga card i own.9600gso.jpg
    Geändert von _Dx_ (26-12-2011 um 23:50 Uhr)

  4. #79
    Registered User
    Registriert seit
    30.01.2012
    Beiträge
    3
    Zitat Zitat von SailorSat Beitrag anzeigen


    Card: ATI Radeon HD4350 PCI-E (ASUS)
    Driver: Catalyst 9.2
    Result: Works / Funktioniert

    Notes: First Radeon to support real 320x240!
    Anmerkung: Die erste Radeon welche echte 320x240 unterstützt!
    For Windows 7 64bit use catalyst 11.3 tested on 320x240 and 640x480

  5. #80
    Registered User
    Registriert seit
    14.02.2012
    Beiträge
    5

    GT430 (Palit) does not work


    Palit_GT430.jpg

    Card:
    NVidia GeForce GT430 (Palit) Driver: 296.10 WHQL
    Result: Does not work / Funktioniert nicht
    Notes: Testet on Windows 7 64-bit. Soft15kHz functions are grayed out. EDID-Dongle did NOT resolve the issue. After installing a HD4650 (thanks SailorSat) everything works fine under Win7 x64 (without EDID-dongle).
    Anmerkung: Lief nicht unter Win7 x64.EDID-Dongle hat nichts gebracht. Soft15kHz blieb grau hintrlegt. Das Problem wurde ducrh eine HD4650 (thanks SailorSat) gelöst. Jetzt funzt alles prima (auch ohne EDID-Dongle).

  6. #81
    Registered User
    Registriert seit
    12.04.2012
    Beiträge
    4

    Radeon HD 4350 works, not MY HD 4650 !

    Card : ATI Radeon HD 4350 works without dongle with Catalyst 12.3.

    Both Nvidia GeForce 9800 GT and GT 440 doesn't work, even with dongle.

    I have two questions : both 9800 GT and GT 440 shows "duplicate" images, meaning that they doesn't support 15 Khz. I've tested them with Nvidia 182.06 drivers, which apparently support 15Kzh settings. Can someone confirm that these drivers are really OK for 15Khz ? And if not, which version is "good" ?

    I also bought and tested a MSI HD 4650 with 1Gb DDR3 under Catalyst 10.3 and 12.3, but it failed, with or without dongle. It surprised me, because page 5 of this thread a similar HD 4650 was succesfully tested. Can someone confirm that some HD4650 models are "different" from others and though don't support 15Khz ? Or is it a Catalyst issue, which means I should try another drivers version ?

    Thanks for all, and of course thanks SailorSat for this wonderful tool !!
    Geändert von James West (12-04-2012 um 18:20 Uhr)

  7. #82
    Registered User
    Registriert seit
    14.02.2012
    Beiträge
    5
    Hi James West!

    I heared here on the board that NVidia cards generally cause problems with soft15kHz. Just skip them altogether. I had a GT440 from PAlit and NOTHING - nor driver, nor Powerstrip, nor dongle - got it to work. SailorSat recommended the HD4650 and it worked with Catalyst 10.3 like a charm! Its powerful enough for Street Fighter 4 (which on a TV looks good enough) and handles MAME perfectly!

    I don't think your driver is the problem...maybe your TV doesn't work with the card....?!? And yes, there are different versions of the HD4650. At least, when I bought the card on eBay, they sold version with DVI, VGA, TV-out and possibly HDMI in different combinations. Try asking in another thread with giving your specific setup.

    I hope that helped,

    regards madef

  8. #83
    Registered User
    Registriert seit
    12.04.2012
    Beiträge
    4
    Thanks a lot madef ! And for my HD4650, I'll open a new thread right now. Thanks again !

  9. #84
    Registered User
    Registriert seit
    17.04.2012
    Beiträge
    8
    Zitat Zitat von madef Beitrag anzeigen
    Hi James West!

    I heared here on the board that NVidia cards generally cause problems with soft15kHz. Just skip them altogether. I had a GT440 from PAlit and NOTHING - nor driver, nor Powerstrip, nor dongle - got it to work. SailorSat recommended the HD4650 and it worked with Catalyst 10.3 like a charm! Its powerful enough for Street Fighter 4 (which on a TV looks good enough) and handles MAME perfectly!

    I don't think your driver is the problem...maybe your TV doesn't work with the card....?!? And yes, there are different versions of the HD4650. At least, when I bought the card on eBay, they sold version with DVI, VGA, TV-out and possibly HDMI in different combinations. Try asking in another thread with giving your specific setup.

    I hope that helped,

    regards madef

    Hi madef,

    Could you please tell me your system configuration as i have bought palit gt440 2gb card a few days ago for my arcade and i want to know that what driver version you have and are you using windows 7 or xp as i have installed win 7 64bit on my q6600 with 4 gb ram and 500 gb hard on Gigabyte GA-EP41-UD3L mobo, I am really confused now that will it work......


    I bought sega Naomi Universal cab with 31khz arcade monitor in it not the tri sync one.

    thanks
    Geändert von kamranijaz (17-04-2012 um 13:56 Uhr)

  10. #85
    Registered User
    Registriert seit
    14.02.2012
    Beiträge
    5
    Zitat Zitat von kamranijaz Beitrag anzeigen
    Hi madef,

    Could you please tell me your system configuration as i have bought palit gt440 2gb card a few days ago for my arcade and i want to know that what driver version you have and are you using windows 7 or xp as i have installed win 7 64bit on my q6600 with 4 gb ram and 500 gb hard on Gigabyte GA-EP41-UD3L mobo, I am really confused now that will it work......


    I bought sega Naomi Universal cab with 31khz arcade monitor in it not the tri sync one.

    thanks
    Just look some posts above. I posted my specs and the configuration. The GT440 does NOT work. I recommend using another card. Regards, madef

  11. #86
    Registered User
    Registriert seit
    17.04.2012
    Beiträge
    8
    Zitat Zitat von madef Beitrag anzeigen
    Just look some posts above. I posted my specs and the configuration. The GT440 does NOT work. I recommend using another card. Regards, madef
    thanks for the reply madef and as you suggested i bought gigabyte hd 4650 as mentioned by Sailorsat, I haven't received it yet buy will get it soon. One question i need to know that the arcade monitor i got is just 31khz nannao with toshiba tube,so do i need to install only 31khz with soft15khz or i can install the lower resolutions as well. i need the high end card so i can play the latest games like SFiv and demul and supermodel3 emulators.

    thanks

  12. #87
    Registered User
    Registriert seit
    14.02.2012
    Beiträge
    5
    Hi!

    The videocard you got ist just fine. I player Super SFIV Arcade Edition (it is the better version since you can freely configure the controls as opposed to the "normal" SFIV) with this card and it works great. As far as soft15kHz goes, I think there is misunderstanding...by hitting the 15kHz, 25kHz or 31 kHz button you just install more different resolutions that enable an 15kHz, 25kHz or 31 kHz output. Normally your videocard is limited to just a few reolutions that are all 31 kHz. Now, if you want a different resolution that is 15 kHz (this is mandatory for CRT-TVs and Arcade monitors AND it looks better for old games!), you need to add the new resolutions and enable them. The "original" drivers from your video card don't give you these....soft15kHz expands the driver to these new resolutions. That's the trick. So, if your monitor only "digests" 31kHz you probably won't need soft 15kHz. Anyway, by hitting the 31kHz button in the software there may be added new 31kHz resolutions that suit you better than the "original" ones. Just try it. Problem is, I don't know your monitor. Please ask someone, who is an expert for monitors. I use a Sony KV-29Xd5 TC-screen as monitor in my cab.

    A tip aside: Use Catalyst 10.3 as driver for your HD4650. It worked great for me! After installing soft15kHz, I played SFIV very nicely on my TV using soft 15kHz. The reolution I used for SF: 640x480 interlaced. For Mame I used 320x240. SFIV also worked under 320x240. The best thing with the HD4650 is that I have installed 2 monitors: One for Windows 7 (to configure the system and stuff) which I run in a high resolution and as a second one the TV-set, which I use for gaming.

  13. #88
    Registered User
    Registriert seit
    17.04.2012
    Beiträge
    8
    Zitat Zitat von madef Beitrag anzeigen
    Hi!

    The videocard you got ist just fine. I player Super SFIV Arcade Edition (it is the better version since you can freely configure the controls as opposed to the "normal" SFIV) with this card and it works great. As far as soft15kHz goes, I think there is misunderstanding...by hitting the 15kHz, 25kHz or 31 kHz button you just install more different resolutions that enable an 15kHz, 25kHz or 31 kHz output. Normally your videocard is limited to just a few reolutions that are all 31 kHz. Now, if you want a different resolution that is 15 kHz (this is mandatory for CRT-TVs and Arcade monitors AND it looks better for old games!), you need to add the new resolutions and enable them. The "original" drivers from your video card don't give you these....soft15kHz expands the driver to these new resolutions. That's the trick. So, if your monitor only "digests" 31kHz you probably won't need soft 15kHz. Anyway, by hitting the 31kHz button in the software there may be added new 31kHz resolutions that suit you better than the "original" ones. Just try it. Problem is, I don't know your monitor. Please ask someone, who is an expert for monitors. I use a Sony KV-29Xd5 TC-screen as monitor in my cab.

    A tip aside: Use Catalyst 10.3 as driver for your HD4650. It worked great for me! After installing soft15kHz, I played SFIV very nicely on my TV using soft 15kHz. The reolution I used for SF: 640x480 interlaced. For Mame I used 320x240. SFIV also worked under 320x240. The best thing with the HD4650 is that I have installed 2 monitors: One for Windows 7 (to configure the system and stuff) which I run in a high resolution and as a second one the TV-set, which I use for gaming.
    Thanks madef, I really appreciate your quick response in this matter and sorry for bothering you too much as i am really new in it and Sega naomi universal is my first cabinet and i dont want to screw that on an early stage , so from your answer that if my monitor is only 31khz than i dont need to install 31khz from the soft15khz and can use the native 640x480 resolution. but if i need to use mame than i need to add lower resolutions with works well with those earliers games i love the most . i think my monitor is Nanao MS-2932-S only digest 31khz if i install lower resolution is there any harm to my monitor or not, i know you dont have much experience as stated but i dont know much people around

    thanks

  14. #89
    Registered User
    Registriert seit
    09.05.2012
    Beiträge
    6
    Dear All,

    I understand that this question had already been asked, but I need to know if the following cards are compatible with Soft 15Khz:


    MSI R4350-MD1GD3H/LP Radeon HD 4350 1GB 64-bit DDR3 PCI Express 2.0 x16 HDCP Ready Low Profile Video Card
    (this is the card that I like to get)
    http://www.newegg.com/Product/Produc...82E16814127613

    Gigabyte
    GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard
    http://www.microcenter.com/single_pr...uct_id=0366104

    ASUS
    M5A78L-M LX PLUS Socket AM3+ 760G mATX AMD Motherboard

    Onboard Graphic Chipset ATI Radeon HD 3000
    http://www.microcenter.com/single_pr...uct_id=0379475


    Diamond
    Radeon HD 4650 1024MB GDDR2 PCIe x16 Video Card
    http://www.microcenter.com/single_pr...uct_id=0298792


    EVGA
    512-P3-1300-LR NVIDIA GeForce 8400 GS 512MB DDR3 PCIe 2.0 x16 Video Card 512-P3-1300-LR


    http://www.microcenter.com/single_pr...uct_id=0354352

    ASUS
    8400GS-1GD3-SL NVIDIA GeForce 8400 GS 1024MB DDR3 PCIe 2.0 x16 Video Card

    http://www.microcenter.com/single_pr...uct_id=0383922



    2) Also, do you prefer AMD or nVIDIA? (success rate) - should I get nVIDIA or AMD ? (I hear that AMD is more compatible.)

    3) What about drivers? Do new drivers (for AMD or nVIDIA) would work, or do I need to look for older ForceWare (if I get a nVidia) or AMD drivers?

    Thanks!


    Many thanks in advance!
    Geändert von c0dehunter (22-05-2012 um 16:43 Uhr)

  15. #90
    Registered User
    Registriert seit
    17.04.2012
    Beiträge
    8
    Zitat Zitat von SailorSat Beitrag anzeigen


    Card: NVidia GeForce 8600GT PCI-E
    Driver: ForceWare 176.19
    Result: Works with Flaws / Funktioniert halbwegs

    Notes: Needs the Soft-15kHz-Dongle (or any other valid EDID source) for resolutions below 512x384.
    Anmerkung: Benötigt den Soft-15kHz-Dongle (oder eine andere gültige EDID Quelle) für Auflösungen unter 512x384.

    P.S. Re-Checked 14.12.2008 with Dongle
    hi

    do you still got the driver for this card as i could not find it on the net.

Seite 6 von 8 ErsteErste ... 45678 LetzteLetzte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •