Suchen:

Art: Beiträge; Benutzer: Rattanee

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Wichtig: So... please be patient, the videos are still...

    So... please be patient, the videos are still uploading, but I really need to hit the hay, so I'm pre-linking them.


    D-MON PRO installation and some info about the SPEED D-MON prototype(most of...
  2. Wichtig: SPEED D-MON update: I've had a lot on my...

    SPEED D-MON update:


    I've had a lot on my plate recently so I couldn't go at the pace I wanted to, but I finally got the SPEED D-MON prototype fully tested audio-wise as well (to make sure...
  3. Wichtig: So I just did the testrun of the SPEED D-MON...

    So I just did the testrun of the SPEED D-MON board, and aside from a few components needing respositioning, it's all fine, so I started calculating costs.

    The bare SPEED D-MON board should end up...
  4. Wichtig: Well I managed to pull my back so as a break from...

    Well I managed to pull my back so as a break from work I've typed up an introduction to both versions of the kit and the different components and what they each do. Let me know if anything's unclear:...
  5. Wichtig: And I finally got around to doing the video. My...

    And I finally got around to doing the video. My front end setup ain't complete yet and it's driving me up the wall... plus I'm not the best speaker (and no time to edit the video or anything...)...
  6. Wichtig: Okay, so I'm pretty much done with the...

    Okay, so I'm pretty much done with the installation of a complete kit into one of my cabinets. I will be uploading a short demo video to youtube in a few hours, I jsut need to cobble together a...
  7. Wichtig: Okay, while I'm waiting for PCB manufacturing...

    Okay, while I'm waiting for PCB manufacturing prices, there's one change I just realized I could make in the main board.
    For those without a parallel port, I could try to add another dip-switch, so...
  8. Wichtig: I'm de-bugging the amplifier board at the moment,...

    I'm de-bugging the amplifier board at the moment, as it seems to get noisy after about 2 hours of on-time for some reason, the main boards however are pretty much ready for manufacture, I'm just...
  9. Wichtig: OPEN4PREORDERS! - Announcing D-MON hardware tool for use with soft15khz!

    Over the past year or so, it's been an ongoing project of mine to create a hardware system to seamlessly integrate an arcade cabinet and a PC with the use of soft15khz. The system has finally reached...
  10. WELL TIMED VIDEO:...

    WELL TIMED VIDEO: http://www.youtube.com/watch?v=T1BGY4XMnPk

    I've adjusted the timing. The pc still has issues, but you get the point. With a properly set-up tinyXP, the entire boot process should...
  11. If you set it up properly, that should not be an...

    If you set it up properly, that should not be an issue. You're supposed to set it up with the command line progs so that the trigger signal is sent just before the front-end starts. If the front-end...
  12. To make things fun, the PC I used decided to act...

    To make things fun, the PC I used decided to act up. Do NOT buy an IBM for any purpose... the security 'dongles' on the motherboard can apparently die from simply moving the pc from one position to...
  13. USB-parallel converters should also work. (though...

    USB-parallel converters should also work. (though untested at this point)

    You can get IBM or Dell PIV systems fairly cheap and they all have parallel ports, and they should be more then adequate...
  14. Alright I'm done with the wiring, just waiting...

    Alright I'm done with the wiring, just waiting for some cleaned surfaces to dry before I fire it up to make a little demo vid.
    Meanwhile here's some pictures of my prototype installed.
    12011
    Your...
  15. From what I have seen, the J-pac does not...

    From what I have seen, the J-pac does not actually cut the monitor signal, just filters out half of the sync frequency so your monitor doesn't fry. Which leaves you with a garbled mess while the PC...
  16. That's actually something I have considered, but...

    That's actually something I have considered, but the timed-triggering was chosen, because this way switching will happen exactly when -you- want it, not when the driver loads.

    A simple frequency...
  17. Project D-MON (Comprehensive MAME solution for use with soft 15khz)

    Project D-MON (comprehensive solution for MAME builders)

    First of all, sorr for the English lingo, I don't speak german, but seeing the relevancy of this project to soft15khz I felt it needed to...
  18. Antworten
    7
    Hits
    4.679

    Indeed after checking it turns out the front-end...

    Indeed after checking it turns out the front-end set an incorrect frequency. Thanks for the help!

    Also, I am developing a PCB to ease the use of mame in arcade cabinets. It has several features,...
  19. Antworten
    7
    Hits
    4.679

    *Insert facepalm of gigantic proportions here* ...

    *Insert facepalm of gigantic proportions here*

    I double checked my wiring, and duuuh... bridged the wrong pins on the VGA conenctor. All is fine now :D

    Awesome little piece of software you...
  20. Antworten
    7
    Hits
    4.679

    I finally broke down and got a TNT2 just half an...

    I finally broke down and got a TNT2 just half an hour ago. I have it set up, and after a reboot, I got my vga screen giving me an unable to sync message. Switched to the arcade screen, and had...
  21. Antworten
    7
    Hits
    4.679

    Frequency change problems

    Hi,

    I was really looking forward to trying this little app when I saw you had experimental support for the intel chipsets, but I have ran into a problem.
    After installing, I start the little app...
Ergebnis 1 bis 21 von 21