-
RGB via SCART
- Introduction
If you wish to connect a RGB-SCART unit, let it be a TV, Beamer or for example an old Amiga monitor, you can build a simple cable.
- Where to get a cable
If you don't want to build a cable yourself, or you don't have any soldering skills, you can buy prebuilt cables at www.wolfsoft.de.
Please note! There are many SCART-to-VGA cables available on the net, which have a different Pinout.
- Pinout
The most simple pinout would be this one.
Code:
VGA SCART NAME
1 ----------- 15 Red Signal
6 ----------- 13 Red Ground
2 ----------- 11 Green Signal
7 ----------- 9 Green Ground
3 ----------- 7 Blue Signal
8 ----------- 5 Blue Ground
9 --100-Ohm-- 16 Blanking = RGB-Select (+5V -> 3V)
5 ----------- 18 Blanking Ground
** ----------- 8 AV-Select -- +5V = 16/9, +12V = 4/3
13 --1000-Ohm- 20 Sync Signal (H-Sync*)
14 --1000-Ohm- 20 Sync Signal (V-Sync*)
10 ----------- 17 Sync Ground
* neg. H-Sync + neg. V-Sync = neg C-Sync
- Pictures
http://images.arianchen.de/soft15khz/vga-scart-35mm.png
http://images.arianchen.de/soft15khz...ga-stecker.jpg
http://images.arianchen.de/soft15khz...vga-buchse.jpg
http://images.arianchen.de/soft15khz...-vga-total.jpg